Wolf Tooth Components Lindarets GoatLink Shimano Direct Mount Rear Derailleur
Does not work with direct mount native frames or SRAM rear derailleurs
Product Features
Compatible with 2013 or later Shimano 10-speed Shadow Plus rear derailleurs that use the 8mm Direct Mount intermediate link whose link is 7.9 – 8.1mm thick
Does not work with direct mount native frames or SRAM rear derailleurs
Improves chain wrap and reduces premature shifting degradation by replacing the Direct Mount link from compatible Shimano ten-speed rear derailleurs
The fastest route to improved wear and long-term shifting performance on wide-range 1×10 drivetrains that utilize Shimano Shadow Plus derailleurs
Goatlinks are designed to optimize the derailleur’s position relative to your cassette. Offered in two versions – a 10-speed and 11-speed, each is intended to improve the shifting of your 1
Exactly the right tool for the job of running a 11-42 cassette on a new shimano 10 speed deraileur. I wanted to upgrade my 9 speed shimano to a 10 speed with a 11-42 cassette. This device is exactly the perfect tool for it. You can’t fit larger than a 34 cog on a stock shimano. Well, technically you might be able to get a 40 on there if you extend the b-screw a bit but then you have an overtensioned deraileur running at a funny angle and wearing your cogs. This is the right solution. No need to crank the b-screw it. This item works with modern Shimano derailures that have a removable…
Works Great! I converted my bike to a 1x and a 10 spd 11-42 cassette and while I could of adjusted the b-screw slightly I opted (at time of purchase) to also get the Goatlink just in-case, which is only slightly longer then the stock Shimano Direct Mount that was on my derailleur (Shimano XT Shadow, Long Cage) but the good news is I didn’t even need to touch the B-Screw or anything else, basically just plug n play, first try all gears shifted fine and no adjustments needed, plus I assume chain wrap is…
Aduro Bike Water Bottle Holder Aluminum Cage, [2X Pack] Bicycle Water Bottle Mount Lightweight for Cycling Fits Any Bike with Easy Installation (Silver)
Voilamart Bike Wall Mount Hanger, 2pcs Indoor Storage Rack, Garage Bicycle Holder Hook Folding Space Saver with Screws, 66lb Max Capacity (2 Pack.) (2PCS)
ZOYO Mountain Bike 27.5” Men’s Bicycle Black Shimano 21 Speed Hybrid Bike Aluminum Frame Lightweight Bike Double Disc Brake Bicycle Easy to Assemble Front Suspension
Bike Phone Mount, Universal Bicycle Handlebar Stroller Holder for iPhone X 8 Plus 7, Samsung Galaxy S9 S8 S7 Note 8, Up to 6.5 Inch Cell Phone Android Smartphone, Bike TIE 2 (2nd Generation) – Red
Loading...
![Aduro Bike Water Bottle Holder Aluminum Cage, [2X Pack] Bicycle Water Bottle Mount Lightweight f ...](https://www.bikingbee.com/wp-content/uploads/2018/09/41Celm14i7L-250x296.jpg)
Exactly the right tool for the job of running a 11-42 cassette on a new shimano 10 speed deraileur. I wanted to upgrade my 9 speed shimano to a 10 speed with a 11-42 cassette. This device is exactly the perfect tool for it. You can’t fit larger than a 34 cog on a stock shimano. Well, technically you might be able to get a 40 on there if you extend the b-screw a bit but then you have an overtensioned deraileur running at a funny angle and wearing your cogs. This is the right solution. No need to crank the b-screw it. This item works with modern Shimano derailures that have a removable…
Works Great! I converted my bike to a 1x and a 10 spd 11-42 cassette and while I could of adjusted the b-screw slightly I opted (at time of purchase) to also get the Goatlink just in-case, which is only slightly longer then the stock Shimano Direct Mount that was on my derailleur (Shimano XT Shadow, Long Cage) but the good news is I didn’t even need to touch the B-Screw or anything else, basically just plug n play, first try all gears shifted fine and no adjustments needed, plus I assume chain wrap is…