tangspower 48V Ebike Battery Charger Output 54.6V 1.5A Electric Bicycle Lithium Battery Pack Charger DC Plug 54.6V1.5A
Brand Name: Tangspower
Quick charge: No
Usage: standard battery
Socket Standard: DC
Whether original: original
Protections: Short circuit / Overload / Over voltage
LED Display: Red: In charging state, Green: Full Charged
Charge Mode: CC to CV
Use: lithium battery pack charger
Input Voltage: 100-240 V 50/60 HZ
Suitable Voltage / Frequency: 90-264 V 47 / 63Hz
Output Voltage: 54.6 V
Output current: 1.5A
Power: 81.9 W
Productivity: 80%
Fluctuation / Noise:
Product Features
- Output 54.6V 1.5A, World Wide Input Voltage 100-240VAC 50/60Hz
- 105℃ Output capacitor, global applicable AC Input voltage.100% full load aging test, Internal EMI filter, ripple minimum. The precision current between ±0.1A, the voltage tolerance is ±0.1V, absolutely not virtual marking.
- The charger Built-in simply fan, with radiating fin surrounding the board, dissipating the heat through the shell, So some hot on the shell when charging is very normal, but it is durable.
- The Charger protected: Short circuit protection/ over current protection/ over voltage protection; red light — charging, green light — charge OK, it stop automatically when the battery is full.
- Replace your broken charger or add an extra charger to charge in 2 locations without taking the original charger with you
Works with Juiced CrossCurrent S This charger works with my Juiced CrossCurrent S. I couldn’t find documentation from Juiced about the exact size of the charger, but it turns out it is the standard 5.5 mm outer diameter (OD), 2.1 mm inner diameter (ID). This charger is slower (1.5A vs 2.A) and smaller than the stock charger, but it’ll still charge a 12.8Ah…