Merax Finiss 26″ Aluminum 21 Speed Mountain Bike with Disc Brakes (Classic Black&Red)
NOTICE
Rotate the fork for 180 degree before assemble the front wheel (the brake will be
1. Assembled front wheel with quick-release pin, no tools needed.
2. Pedal threads are different from left side and right side. L / R signs are marked on the spindle of the each pedal, make sure they are assembled on the right side (when you ride on the bike, left pedal on your left hand, right pedal on your right hand). The right side pedal has a right-hand thread(removes counterclockwise, installs clockwise). The left side pedal has a left-hand thread (removes clockwise, installs counterclockwise).
Thread both pedals into the crank arms as far as you can by hand. Then Fully Tighten them with the wrench. If the pedals are not fully tightened, it may get loose and damage the threads, we will NOT be responsible for such damages.
3. Assembly and Tuning Required
This bicycle arrives 85% assembled. You will need to install the pedals, front wheel, handlebar and air up the tires.
4. Please MAKE SURE check at below link before purchase the bike:
http://www.merax.com/helpcenter.html
Please kindly note that the standard of our design for this bike is 330 lbs, but in order to guarantee a long-term use, a relatively low weight limit is stated on the package (220 lbs).
Specifications:
Frame: 6061 Heat Treated Aluminum
Fork: Suspension Fork Alloy 80mm Travel
Shifters: Shimano EF51 21 Speed
Wheels: Double Wall Aluminum Rims
Rear Derailleur: Shimano RD-TZ50
Front Derailleur: Shimano FD-TZ30
Crank: Aluminum Triple 42/34/24
Brakes: Mechanical Disc
Brake Levers: Shimano Aluminum
Seatpost: Aluminum w/ clamp 31.8 M8*60MM
Handlebar:Aluminum
Pedals: Aluminum 9/16″
Number of Speeds: 21
Product weight: 33 lbs
Frame size: 19″
Product Features
- Lightweight Heat Treated Aluminum Mountain Frame
- 26″ Double Wall Aluminum Rims Wheels for Easier Rolling
- Shimano 21-speed Derailleurs and Shifters for Reliable Shifting
- Front and Rear Mechanical Disc Brakes
- Suspension Fork 80mm Travel provides Smooth Bumps and Increases Control. Rotate the fork for 180 degree before assemble the front wheel (the brake will be in front of the bike) .
Loading...
Honest review.. I just got this bike today. I took it to my local bike shop for them to set it up. (40.00) bike looks great rides real smooth shifts great and has good quality hardware and brakes. The negative for this bike is the front shock. This is why the bike is 200.00 they went cheap with the fork. Im 265lbs and i bottom it out. I ordered a shock for 100.00 with a lock out for the bike. The only reason i didnt give it 5 stars is because of the shock. Other than that the bike is comparably to a 700.00…
Great donor for an e-bike project. I purchased this bike for an e-bike project. I already had a nice Giant Mountain bike but my current bike is old and doesn’t have the features one would like for an e-bike. My old bike lacked disc breaks and suspension front fork needed for a bike traveling near 30 miles an hour. I understood that I could upgrade my Giant to make it safer to ride as an e-bike but then I wouldn’t have a bike I could could take out for a none e-bike experience.I think this is a great starter bike…