AW 26″x1.75″ Rear Wheel Electric Bicycle LCD Display Motor Kit E-Bike Conversion 48V1000W
Specification:
High motor efficiency: >80%
Motor diameter: 245mm
Reinforced 32mm rim and 40mm tire
Durable 600D Oxford cloth carrying bag along with a zippered main compartment for controller
It’s for bicycle only.
Package Content:
1x 1000W 48V brushless hub motor
1x 26″ Rear wheel (the whole wheel with tire!)
1x Electric controller
2x Brake pullers
1x Speed throttle
2x handlebar grips
1x LCD Display
1x PAS
1x Controller bag
1x Battery connection cable
1x Fuse
1x Rope (color will pick at random)
1set Widing pipe/Cable tie
1x Manual
Notice:
Battery recommendation: Electro kinetic cell battery ( Li, lead-acid, NiMH battery etc.) featured in nominal voltage 48v, nominal capacity not less than 17Ah is compatible with the motor
We also provide high quality 48V 14AH Li-polyer Battery w/ Holder Charger For 48V 1000W Electric Bicycle. Search ASIN(B00XP53DH4) for more information.
Please note that the bike in the pictures is not included for demonstration only.
Product Features
- LCD Display: to show battery power, time, speed, mileage and gears
- Pedal Assistance System (PAS): let you enjoy cycling while driving electric bike
- Dual Mode Controller: Motor works under Hall effect and non-Hall effect, extend life for electric bike
- Wheel Size: 26 Inch x 1.75 Inch; Top Speed: Approx. 45 KPH
- Complete wheel set: Reinforced 32mm rim and 40mm tire
Fast electric bike. Very good electric motor. I use at 50v 20ah battery for this kit. I enjoy cruising around the park and neighborhood on weekends. I also commute to work using this kit. The fastest you can go on level ground is 32mph with this 1000w motor. It will accelerate to 32mph quickly. When I use it at 32mph, the battery will die in around 30-40mins but I usually cruise at 20mph when going to work anyway. The highest speed recorded was 42mph but that was when I was going downhill. The speedometer and…
Well worth it! This is awesome! I used this for a custom made handicapped electric bike for wheel chairs. It is silent, and most people don’t even realize that it is electric. The install took about 4 hours only because it was a custom bike and I extended the wires for the controller. I am not using the pedal sensor, just the throttle controls. Keep in mind you may have to move your gear shifter to the opposite handlebar and mount it upside down if you have a…
Meets expectations and performs very well. I am very happy with this kit because it does all it says and performs up to my expectations. Took a few times fitting the wheel into the drop outs to ensure proper spacing, washers, bolts for rear rack clear casette, etc. Took about 4 hours for an experienced bike mechanic to assemble. I also swapped my Kenda 2.25″ tire on to the rim because it was wider and matches the front tire. I like that the spokes are very thick, the rim is double wall and very stout. Although some of the wiring…